Attention should be paid to the details of ten customized wardrobe. From material selection to installation acceptance, each one is experience.
First, the pricing method must not be too complicated, or you don’t know where the money is spent. The novice directly uses the area algorithm, which is simple without detours, and does not use the expanded area to calculate. It is particularly easy for businesses to repeatedly charge, but you should ask the boss whether it costs more to do more drawer work.
Second, we should choose the cabinet door according to the size of the bedroom. If the aisle width is greater than 90 cm, we should choose the side hung door. The hinge is more durable than the rail, and it is clear to take clothes. It can also be extended to make a bedside table door type. To make it high and thin, the stretching ratio will show more layer height, but the width is less than 60cm. You should choose a sliding door, so that the space will not be cramped.
Third, if you want to improve the appearance of the wardrobe, you should be a top door with strong integrity and simplicity. Don’t forget to make a straightener when the height of the door panel is more than 1.8 meters to prevent deformation. If you don’t want to have ugly and wavy gaps like this, you must make a small ceiling. Note that the depth of the wardrobe should not exceed the small ceiling. It is better to make it flat.
Fourth, the safest way to match the color of the wardrobe is to use the same color system, but if you want to make a high sense, you can use small areas of color jump to form a strong contrast, but you should pay attention to printing, waist line and carving. It is really ugly and abrupt.
Fifth, the internal layout is unreasonable. It seems that a lot of storage has been done. In fact, there are not enough clothes to put in. We must make fewer partitions and more hanging areas. It is better to make double layers. The short clothes area is matched with a long clothes area, so it is not easy to take them in disorder. Don’t make an open space at the corner of the wardrobe. It is messy to put odds and ends of things. There is a lot of dust.
Sixth, don’t worry too much about the non environmental protection of the particle board used in the wardrobe. As long as the environmental protection level of the board exceeds e1, it is safe to use it. If there are children at home, the finger joint plate uses less glue, which is also a good choice. Solid wood is not recommended, which is easy to crack and deform, and the price is not low.
Seventh, if the wardrobe can be customized, don’t go to the carpenter. The edge sealing technology is not in place, there is a lot of glue, and the formaldehyde is easy to release. In case of laser edge sealing, do not hesitate to choose directly. The instant high temperature can directly achieve the effect similar to welding. It is solid and beautiful, and it can also seal formaldehyde firmly inside.
Eighth, hardware directly determines the service life of the cabinet. The hinge shall be equipped with two sections of force with damping, the strength of buffer switch, the cabinet door is not easy to sink and deform, and the drawer slide rail shall pay attention to the load bearing. Three section rails with side sliding shall be selected below 20kg, and the bottom rail shall be selected above 20kg, so that the dragging can be smooth.
Ninth, the customization of the whole house is a personalized product, and it is inevitable to add more items. If you accidentally add seven or eight thousand items, you must know in advance how much the drawer hardware handle package contains, how much more money will be added if the size of the board exceeds the standard, and if the light board is included, how much money will be added if you change the style and color?
