Some people say that the messy wardrobe is the fault of lazy people, just clean it up diligently? No no no! The design is not practical, the wardrobe must be messy, and the speed of cleaning can not keep up with the speed of chaos, but a good wardrobe design can be easily stored, and there is almost no housework burden.
- Size design
thickness
The thickness of the wardrobe includes the depth of the interior of the wardrobe, the thickness of the cabinet door and the thickness of the back panel. According to the shoulder width of men <450mm and the shoulder width of women <400mm, the thickness of the wardrobe is usually designed to be 600mm, so that when hanging clothes, there is plenty of space on both sides of the sleeves. If the space is tight, the interior of the wardrobe can be properly compressed, but remember that the thickness of the entire wardrobe should be at least 550mm, otherwise it is very impractical. Therefore, the reasonable size of the wardrobe thickness is between 550~600mm.
high
The height of the wardrobe is usually based on its own floor height. The most commonly used form is the top of the wardrobe to the floor or ceiling, and the gap is sealed with gypsum board or gypsum line. The purpose is to prevent dust from falling on the top of the wardrobe, which is difficult to clean at high places. Make the most of it.
width
The width of the wardrobe is related to the cabinet door. Generally, the width of the open wardrobe door is 450~600mm. Because the bearing capacity of the hinge is limited, the track-type sliding door can be 600~800mm wide.
- Partition design
vertical partition
Usually “one person, one area” by family members, whether it is a husband, wife or children, each person needs to occupy a separate area. That’s right, it’s everyone, especially don’t mix the clothes of children and adults. It is very important for children to learn to manage their own belongings and develop a sense of independence.
The vertical partition is combined with the design of the cabinet door. Once the wardrobe is opened, it is a small area belonging to one person from top to bottom, so that you can quickly find your goal without messing up your family’s clothes.
Horizontal partition
Usually according to the frequency of use, the interior of the wardrobe is divided into three areas: upper, middle and lower.
The middle area is easy to take, so it is most commonly used; the lower area needs to bend over, so the frequency of use is average; the upper area needs to climb the most troublesome, so it is the least commonly used. Therefore, the middle area is often the clothing that is being worn in the season, the lower area is mostly luggage, shoes, and accessories, and the upper area is mostly seasonal clothes, bedding and other sundries.
- Effort-saving design
suspension
Hanging is the most labor-saving way to reduce the burden of housework, so the middle area of the wardrobe is the most commonly used, do not doubt or hesitate, install all crossbars and make it into a hanging area!
Due to the different lengths of clothes, tops, trousers, long coats, and long skirts require different hanging heights. It is best to divide the hanging into several, and only hang clothes of the same type and length together to save effort in finding clothes. The space is more fully utilized. The height of hanging tops needs to be about 800mm, trousers need about 700mm (usually folded and hung with a trousers rack), and long coats and long skirts need about 1400mm.
Separator
Of course, there are also clothes that are not suitable for hanging, such as knitted sweaters and sweaters, because they are afraid of deformation, it is best to store them flat, so wardrobes are often designed with layers of partitions.
Note that this kind of clapboard has disadvantages!
First of all, not to mention the high cost (wardrobes with many partitions are expensive), the key is that the space on each floor is fixed, and the function is very rigid. It is very likely that “T-shirts in summer do not occupy one floor, and two layers of sweaters in winter are not enough.” , “It is too wasteful to put a small bag, it is too wasteful to put a large bag, and it is a bit crowded to put two bags” and so on.
drawer
Advantages ① The drawers that can be pulled out are much less labor-intensive to use than the partitions that need to be stretched in by hand. Most of the space in the depths of the partitions is wasted, and all the drawers can be used;
Advantages ② Drawers are usually set under the hanging area, making full use of the lower space of the wardrobe;
Advantages ③ Clothes can be put up in the drawer, inserted like a book, or rolled into a roll, one next to the other, easy to identify and take;
Advantages ④ Various forms of storage compartments and storage trays can be added to the drawer to plan accessories such as watches, ties, sunglasses, etc. When the drawer is opened, all items are neat and pleasing to the eye.
- Modeling design
Wardrobes often take up a huge amount of space. In the bedroom, when the wardrobe is placed against the wall, the room will appear small and bring a sense of oppression, and the bedroom is a place for people to rest, and the sense of oppression is definitely a minefield of bedroom design.
Therefore, if possible, the wardrobe is best embedded in the wall, for example, the wall is set back about 600mm to form a concave space, and the wardrobe is embedded in it, which naturally has the effect of “the wardrobe is hidden behind the wall”, which visually expands the sense of space.
