Wardrobe Backboard Thickness and Edge Banding Knowledge
What is the better thickness of the backboard of the wardrobe?
Although the backboard that supports the overall wardrobe is not exposed to people’s eyes, what is the thickness of the overall wardrobe backboard? Let’s take a look!
1.Which board is the back panel of the overall wardrobe?
Under normal circumstances, the overall wardrobe is installed in the room, standing against the wall, so the largest contact area between the wardrobe and the wall is the backboard of the overall wardrobe. The whole wardrobe is composed of different panels, and the back panel is a whole panel directly nailed to the two side panels.
2. What are the functions of the overall wardrobe back panel?
On rainy days every year, the air is relatively humid. If the backboard of the wardrobe is poor in moisture resistance, the clothes, bedding and other items stored in the wardrobe are prone to damp and mold, causing the clothes to smell or even damage the clothes. The backplane is generally non-load-bearing, mainly for dust-proof, moisture-proof, and stable functions.
3. The thickness of the backboard of the wardrobe
The thickness of the backboard of the overall wardrobe is commonly used in three thicknesses: 5MM, 9MM, and 18MM. It is better to analyze the thickness of the backboard of the overall wardrobe from the three aspects of the gap, moisture resistance and stability of the backboard.
5MM thickness
Clearance: The use of a 5mm overall wardrobe backplane can leave a lot of gaps, which is why many consumers or businesses choose 5mm backplanes. However, the thickness of the 5mm backplane is always too thin. Whether it is the slotting of the wardrobe backplane or the overall stability of the product, the 5mm backplane cannot fully display the performance of the wardrobe.
Moisture resistance: The 5mm thick wardrobe back panel can basically satisfy the use in terms of moisture resistance. Although moisture will not be directly immersed, it will still cause certain harm to the moisture resistance of the panel if it encounters a long period of severe rainy season.
Stability: In terms of the stability of the back panel of the 5mm wardrobe, if it is a large wardrobe, the length of the size between 1000mm-2000mm, for the stability, the back panel is less stressed, and the possibility of deformation is also less. If the length of the wardrobe span is greater than 2000mm, the corresponding stress on the back panel will be too large. It is easier to deform with a 5mm back panel, and it is also easier to break the back panel.
9MM thickness
Gap: 9mm backboard is a more commonly used thickness size for custom wardrobes, because in terms of gap processing, the thickness of 9mm backboard is more suitable for slotting, and the gap between the wall and the wall plays a very good role, and the backboard occupies the wardrobe space. It is not very large, which helps to leave a gap between the backplane and the wall, so that the moisture-proof performance is better.
Moisture-proof: The overall wardrobe backboard with a thickness of 9mm can do a good job of moisture-proof work in the saved space wall, so that the backboard is more reliable, and the gap is appropriately reserved, and appropriate moisture-proof cotton can be added in the middle. The moisture-proof performance of the wardrobe back panel is more superior.
Stability: The load-bearing capacity of the 9mm-thick wardrobe back panel is sufficient to support the gravity of the top cabinet and each shelf. It not only ensures the stability of the wardrobe, but also reserves more space so that the wardrobe will not protrude or cause the wardrobe The use area becomes smaller, etc., and it is more suitable for the overall wardrobe with a larger width.
What are the materials for the sidebands of the wardrobe?
What kind of edge banding materials are there for the whole wardrobe? Differences between edge banding materials
1. Veneer veneer
The appearance of natural solid wood, with natural texture, can create a relaxing atmosphere in the home environment.
Disadvantages: The paint is easy to fade, and the veneer is easy to crack.
2. PVC film
There are many shapes, rich colors, good abrasion resistance, good flexibility, no cracking, no fading, and it is a common material for furniture at home and abroad.
3. ABS edge banding
The ABS edge banding has a variety of colors, textures and surface materials to choose from, which can be matched with other products including double veneer panels, countertops, and fireproof panels.
