01. Kitchen Cabinets board selection
The thickness of the plate directly determines the service life of the cabinet. Generally, a material with a thickness of 18mm can be selected to ensure that the door panel does not deform and the countertop does not crack. However, the thickness of the painted door is preferably 20mm.
Counter-tops: There are many kinds of counter-tops, such as quartz stone counter-tops, slate counter-tops, stainless steel counter-tops, fireproof board counter-tops, solid wood counter-tops, etc.
Cabinet: Kitchen cabinets are generally made of solid wood, multi-layer solid wood, stainless steel, fireproof board, moisture-proof board, particle board, density board, aluminum alloy, etc.
02. Cabinet hardware selection
There are many hardware parts for kitchen cabinets, such as door hinges, pull baskets, handles, etc. Remember to choose buffered door hinges. If you don’t close the door later, there will be a lot of noise; it is recommended to choose built-in handles, so you don’t have to worry about cooking. Knocked the handle.

03. Cabinet installation process
The quality of the installation process depends not only on whether the countertop is flat and whether the joint is tight, but also whether the joint method of the cabinet body and corners is smooth and smooth.
The same is true for the sink on the countertop. When purchasing, you should ask whether it is made by one-time pressing. The one-time pressing process has stronger integrity and better sealing, which can effectively protect the cabinet from moisture invasion. .
04. Cabinet moving line partition
According to the design of a series of operating habits of most families, such as taking vegetables from the refrigerator, washing vegetables, cutting vegetables, frying vegetables, and placing dishes, the cabinets should be allocated with a good space to avoid running back and forth to increase the difficulty of the cooking process.

05. Wall cabinet depth and height design
If the wall cabinet is too deep, it will not only be difficult to pick up items from the innermost side when in use, but it will also be easy to touch your head when cutting vegetables, which will also block light and sight. Therefore, the depth of the wall cabinet is about one-third less than the depth of the cabinet below.
The height of the wall cabinet can be determined according to the height of the cook, or the wall cabinet can be on the top, there is no dead space, and the cleaning trouble is reduced. However, if the top-flip cabinet door is installed, it is not suitable for topping. After the top-flip cabinet door is opened, the owner who is not tall enough may not be able to close it.
06. Installation time for custom kitchen cabinets
If you want to install the cabinets after the kitchen is completed, you must fix the plates, styles, dimensions, etc., so that the factory can make them in advance.
