The first step in the acceptance of kitchen cabinet: first look at the countertop.
1. The polished kitchen counter surface is smooth, without rough marks, and the surface is flat without cracks and gaps. This will prevent oil and water stains from penetrating easily. It is also very convenient to clean.
2. The glue on the seam of the table must be smooth, and the glue line of the seam cannot be seen, or the obvious gap can not be felt by hand.
3.The position of the sink and the cooker on the countertop needs to be opened. The edge of the opening should be smooth, and there should be no uneven shape. The four corners should be curved.
The second step of kitchen cabinet acceptance: kitchen cabinet body
1. The overall smoothness of the cabinet
Before installing the base cabinet, shake it to see if it is firm. After installation, it is recommended to use a spirit level to measure whether the base cabinet is level.
2. Cabinet plate edge sealing
High-quality kitchen cabinets have fine and smooth edges, good hand feel, straight edge lines and fine joints. If the edge sealing is not firm, it may cause harmful gases in the board to volatilize into the air.
The third step of kitchen cabinet acceptance: kitchen cabinet door panel
1. The appearance should pay attention to whether the color number, material and shape of the door panel are the same as the original communication requirements.
2. The surface should be flat, without damage and bubbles, pay attention to whether the color of the edge seal meets the requirements when ordering, and the opening needs to be closed with a practical ring-shaped sticker.
3. The installation positions should correspond to each other, the height should be uniform, the width of all the middle seams should be the same, and the handles should also be installed on the same horizontal line.
The fourth step of kitchen cabinet acceptance: hardware accessories
1. The most important hardware accessories for kitchen cabinets are hinges. High-quality hinge steel is thicker, has high flexibility, and has good corrosion resistance.
2. The installation of the handle is related to the durability of the kitchen cabinet. Check whether the handle is level and whether it is shaken during acceptance. Sufficient space should be left for opening and closing the cabinet, and there should be no collision between the door panel and the door frame when opening and closing.
3. The high-quality drawer slides should be smooth, silent, light, and soft to bounce back. The drawer gap should be uniform, and there should be no jamming or loose left and right when pulling.
4. Although the hardware accessories are small, they are the key to the quality of the kitchen cabinets. Therefore, it is necessary to focus on checking whether the screws are fixed and whether there is rust.
