How to maintain the stainless steel whole kitchen cabinet? I believe that many people are troubled by this problem and want to get some good solutions. The specific maintenance plans are as follows:
1. Maintain the stainless steel overall kitchen cabinet, wax it regularly, and apply a layer of wax to the painted kitchen cabinet every 3 months. Before using the varnishing wax on the lacquered kitchen cabinet, check whether the surface of the lacquer layer is intact.
2. In the process of daily use, it is difficult to avoid oil fume in the kitchen. When there is oil fume and oil stains on the surface of the door panel, it can be wiped with detergent. Note that the ratio of detergent: water = 1:10, the rag needs a clean cotton cloth.
3. Anti-drying: The use of air conditioners at home and high-power lighting in the kitchen can cause local air drying, which may cause slight cracking of the four corners of the solid wood door panel (crack range: 0.1-0.2mm). In order to avoid cracking or deformation caused by the moisture imbalance of the door panel, it is recommended to soak a clean cotton cloth and squeeze it until it is six minutes dry, and wipe it evenly on the backside of the solid wood door panel to retain proper moisture. If the air in the house is too dry, a humidifier can be added to the solid wood kitchen cabinet area. Cycle: Do a water balance every 1-2 days. The wiping cycle depends on the specific conditions inside and outside the use environment, which can be divided into one week or two weeks.
4. High temperature resistance: The molded cabinet cannot be in contact with or close to high temperature objects for a long time, and the main body of the design should not be too long or too large, otherwise it will be easily deformed. It is best not to smoke in the kitchen, the temperature of cigarette butts will burn the film on the surface of the board. Discoloration will occur due to high temperature, and its fire resistance is poor, so direct exposure to high temperature should be avoided as much as possible during use. Blister should be kept away from high temperature as far as possible, such as: do not directly bake the door panel with an open flame, so as to prevent the PVC from falling off the surface of the door panel.
5. Anti-collision injury: During use, it is necessary to prevent the touch of hard objects, and be careful not to scratch the surface of the door panel with sharp objects. Do not squeeze or insert the junction of the membrane and MDF with a sharp object. Do not rub the surface of the door panel with items such as steel wool.
6. Clean stubborn stains: To eliminate more stubborn stains, it can be wiped with decontamination powder and cleanser. Do not scrub with high-concentration or corrosive organic solvents. Be careful not to use steel wool or rough brushes to avoid damage to the door panel.
With some of the above maintenance methods, it is more convenient to maintain the stainless steel kitchen cabinet, and I hope it will help you.
