Pull basket
It is an indispensable piece of hardware in kitchen cabinet furniture, which can facilitate the storage of kitchen food in our lives. Common pull baskets on the market include seasoning pull baskets, pot baskets, bowl baskets, corner UFO pull baskets, corner pull pull baskets, deep pull baskets, and some pull basket pendants.
1. Seasoning pull basket
The size is generally 150mm side pull basket, 200mm cabinet pull basket, 250mm, 300mm, 350mm, 400mm, 450mm cabinet pull basket. It is usually placed on the side of the stove cabinet. Soy sauce and vinegar condiment bottles can be placed in the pull basket. In addition to the 150mm side pull basket, the other pull basket slide rails are installed on the bottom of the cabinet, so the cabinet body is no problem if it is larger. . Be sure to remember that all pull baskets are divided according to the cabinet. You don’t need to remember the stainless steel size inside. For a 400mm cabinet pull basket, just design a 400mm cabinet. It can be appropriately larger, no problem, 410mm/430mm are ok, 150mm cabinet seasoning pull basket pull basket slide rail should be installed on the side panel of the cabinet, if the slide rail is installed on the bottom plate, the pull basket will be too strong to pull out. Harm, so the 150mm cabinet body seasoning pull baskets are all side slides. Choosing the seasoning pull basket hardware can be more convenient to use in life. The depth of the pull basket is generally between 450mm-500mm.
Since the seasoning pull basket has depth requirements, it is necessary to pay attention to it when designing, and there should be no obstacles behind the pull basket.
2. Bowl and tray pull basket
800 cabinet bowl
Another type is the bowl and plate pull basket. The seasoning pull basket is pulled out vertically, and the one pulled out horizontally is the bowl and plate blue. This is usually a set, with bowls on one layer and pots and pans on the other. The material is mainly stainless steel. , The product design structure is determined by the different welding positions of the stainless steel bars. Pot bowl basket set, top bowl basket, bottom pot basket
Under normal circumstances, we use the pull-out three-sided blue. If the cabinet has been installed in the customer’s home and the pull basket is added, you can also choose the four-sided blue to use in the cabinet with side-by-side doors.
Two-sided door can choose four-sided blue
Please pay more attention to the size of pot and bowl blue. Basically, the smallest size on the market is 600 cabinets, and the 100 base is not like the seasoning pull basket 50 base, the size is 600mm/ 700mm/ 800mm/ 900mm.
Basket size selection
The cabinet body must be designed according to the specified size of the basket when designing this pot and bowl blue. A 600mm cabinet is a 600mm cabinet. 700 is a 700 cabinet. It cannot be large or small. Because the slide rail is installed on both side panels. For example, if you design a 610mm cabinet, the slide rails on both sides of the pot basket cannot be installed.
The pan and bowl basket slide rails are installed on the left and right side panels of the cabinet.
When designing, the bowl basket should also pay attention to the depth and height, so as to avoid the bowl basket cannot be closed after being put into the plate.
3. Pull the basket at the corner {commonly known as the little monster}
In addition to the common seasoning pull blue, the bowl blue also has some special pull baskets. The corner pull baskets placed in the corner cabinet are commonly known as little monsters. The general size requirement is a 900mm corner cabinet with a depth of 510mm or more, and it needs to be designed according to the installation size of the hardware accessories.
The corner pull basket cabinet needs to be designed with a width of 900mm and an inner space greater than or equal to 860mm, and the design of the cabinet door is greater than or equal to 450mm
Note that this pull basket door opens in the opposite direction, and the door panel is the same as the seasoning pull basket and pot bowl basket without hinge holes.
4. UFO pull basket
The corner pull basket of the flying saucer requires a vertical bar and a front horizontal pull bar in the middle of the cabinet to fix the turntable shaft
Pay attention to the design of the corner pull basket for flying saucers. There should be no obstacles in the cabinet. The cabinet design is recommended to be a 900mm cabinet, and the depth of the cabinet is greater than 510mm. Pull the basket to open left and right, you must pay attention to the design when placing an order.
5. Angle pull basket 180 degree turntable pull basket
The design size still requires a cabinet with a width of 900mm, a depth of 500mm or more, and the door opening is greater than or equal to 450mm
180 degree turntable pull basket
6. Right-angle corner cabinet 270 degree turntable pull basket/360 degree turntable pull basket
270 degree corner pull basket, suitable for right-angle corner cabinets,
270 degree corner cabinet pull basket, door panel can choose 175 degree hinge to open. Or a conjoined piece consisting of a 165-degree hinge and a 135-degree hinge.
7. High and deep pull basket big monster
Deep pull basket Big monster pull basket
Just like a large refrigerator, it is generally designed to pull the basket into the tall cabinet. Larger kitchens can be used. The design size is also installed and equipped with product size design.
In the size design, the number of layers of the pull basket determines the height. The appropriate size can be selected according to the design of the cabinet. Note that the depth of the cabinet should be more than 520mm. The model is generally divided into 450mm cabinet and 600mm cabinet.
8. Aircraft carrier type monster pull basket
Aircraft carrier type monster pull basket. The size is still 450mm and 600mm cabinets, depending on the number of layers.
9. Multi-layer rotating high-deep pull basket
The size of the pull basket is subject to the cabinet of 300mm or 450mm. The depth of the cabinet must be greater than 500mm. 480mm is not recommended.
