Stainless Steel Kitchen Cabinet Acceptance Five Steps

Stainless Steel Kitchen Cabinet Acceptance Five Steps

1. Countertop
   Kitchen countertops are commonly used in daily life, so remember to pay attention to them during the acceptance process, and any non-compliance will add a lot of trouble to your daily life in the future. The combination of the countertop and the base cabinet should be stable, and there should be no looseness, so as to ensure a good levelness after installation. If the countertop is made of artificial stone, the artificial stone countertop should also be seamlessly spliced. The countertop should be flat and smooth to ensure that there are no obvious scratches. The gap between the tile wall and the rear water barrier should be less than 3mm, and then seal it with sealant.

2. Base cabinet
   The specific location of the base cabinet must be installed in strict accordance with the design drawings. Do not arbitrarily change the position of the base cabinet. After all, the installation of the kitchen cabinet is made after many measurements and planning and layout. Random changes in the orientation will cause the entire kitchen to fail. Layout is affected. Check whether there are any scratches, indentations and other damage on the outer surface of the base cabinet, whether the door switch is in good condition, whether the height of the handle is uniform, whether there is obvious gap when closing, if it is a cabinet with a sink, the bottom plate must be waterproof aluminum foil. Use a vertical measuring instrument to check the verticality and levelness of the base cabinet to prevent the base cabinet from shifting.
3. Wall cabinet
   Regarding the installation of the hanging cabinet, it must be firm, and attention should be paid to avoid tilting. The screws at the joint with the wall must be larger than M8, so as to ensure that the bearing capacity of the hanging cabinet is sufficient. For other precautions, please refer to the base cabinet.

4. Hardware
   During acceptance, hardware accessories are very important. Be sure to check whether the brand and style are the previously agreed styles to prevent them from being exchanged. For the requirements of hardware accessories, just ensure that they are not sharp, high quality, anti-corrosion and oxidation, strong and durable. That is, in the hardware accessories, the acceptance of the drawer is particularly important. To ensure that the installation is firm, it must be turned on and off multiple times to verify that it is smooth and there is no unnecessary sound. The gap of the drawer must be uniform. If the drawer can still be closed automatically after being opened by 20mm, it proves that the weighing ability is good.
5. Others
   The installation of the kitchen cabinet also includes the installation of the sink and the stove. Regarding the specific size of the sink and stove, it should be installed reasonably according to the size of the kitchen cabinet at home. The place where the sink and the countertop fit must be sealed with glue. , The installation of the faucet must be firm, and the pipes and connections can be unblocked to ensure that there will be no water leakage. Regarding the range hood, it is necessary to adjust the position according to the specific size of the kitchen cabinet.