Kitchen cabinet

The Whole Kitchen Cabinet Designs Knowledge Collection.

Kitchen Cabinet Designs

1. The thickness of the whole cabinet

The thickness of the whole kitchen cabinet designs body directly affects the weight and service life of the whole cabinet itself. At present, there are 16 mm and 18 mm thickness plates on the market. The cost of 18 mm thick plates is 7% higher than that of 16 mm thick plates. However, the service life of the whole cabinet made of 18 mm thick plates can be more than doubled to ensure that the door panels are not deformed and the countertops are protected from cracking. So don’t try to be cheap when buying.

2. The sealing method of the back panel of the whole cabinet

The single-sided sealing back panel is prone to damp and mildew, and it is also easy to release formaldehyde and cause pollution, so it must be sealed on both sides.

Kitchen Cabinet Designs
Kitchen Cabinet Designs

3. Understand the composition of artificial stone for countertops

Suitable materials for kitchen countertops include fireproof board, artificial stone, natural marble, granite, stainless steel, etc. Among them, artificial stone countertops have the best price-performance ratio. The cheap countertop calcium carbonate has a high composition and is easy to crack. At present, composite acrylic, pure acrylic, etc.

4. The installation method of aluminum foil for the whole cabinet sink cabinet

Is the sink cabinet pressed at one time or glued during installation. The sealing performance of one-time pressing is better, water and moisture are not easily penetrated, and the cabinet body is more effectively protected and the service life of the whole cabinet is prolonged.

5. Can the manufacturer of the whole cabinet provide an inspection report?

The whole cabinet is a furniture product, so try to choose materials that are environmentally friendly and harmless to the body. The state has expressly stipulated that the finished product inspection report shall be issued and the formaldehyde content shall be clearly stated. Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials does not mean that the finished products are environmentally friendly. Only when the finished products are qualified can their products be certified. Therefore, you can ask for it from the merchant when purchasing, or you can record the number of the quality inspection report presented by the merchant and call the quality inspection department to verify the authenticity.

Related Posts