First, the back panel of the kitchen cabinet is reduced or not installed directly
1. Do not install the backplane directly
The load-bearing of the cabinet is supported by the panels on both sides and the front and rear panels. For the best interests of the merchants, many merchants do not install the backboard of the kitchen cabinet. After the cabinet back panel is reduced, the merchants use plate chains to link the side panels on both sides of the cabinet.
2. Reduce the kitchen cabinet back panel
It is very common to reduce the kitchen cabinet backplane. There are about 30/100 cabinet back-planes on the market that are shoddy. The most common is to replace the cabinet board from 9mm to 5mm MDF or particleboard installation.
Second, reduction of kitchen cabinet feet
The feet of the cabinets are relatively concealed, mainly for supporting and adjusting the countertop. Use plastic feet, the practice of most businesses. The main reason is that the cost is too low. Many people may think that the cabinet is directly to the ground. In fact, the cabinet also has feet, but it is blocked by the skirting line. Because of this, most businesses will have plastic feet.
For home use, it is better to use aluminum alloy material and stainless steel material, which are better than plastic mats in terms of anti-corrosion, moisture-proof, skilled, durable, and anti-oxidation.
Third, side sealing plate of kitchen cabinet
The side sealing plate of the kitchen cabinet is the closing plate on both sides of the cabinet, which is an important part of the kitchen cabinet. Mainly play the role of load-bearing, closing, and preventing cabinet deformation. Most custom kitchen cabinets now use particle single-layer sealing boards. When customizing by yourself, it is best to add a side panel to the original base, which can not only prevent the cabinet from deforming, but also effectively improve the service life of the cabinet.
Fourth, the hinge
The hinge is an accessory linking the cabinet door and the side sealing plate, which mainly plays the role of opening and closing the door. How long the cabinet can last, whether the cabinet door can be opened or not, and whether it makes a lot of noise are all determined by the quality of the hinges. Therefore, it is better to buy better cabinet hinges. For example, imported Blum and domestic DTC are very good.
Five, kitchen cabinet top plate
If the top plate of the cabinet is made of plate, the first choice is a solid wood backing board, and the second is a multi-layer solid wood backing board. Particleboard, density board, honeycomb board will be deformed and damp, and may cause the countertop to crack.
Suggestion: Custom kitchen cabinets should do a few things well:
1: The thickness of the plate is preferably 18mm, and the second choice is 16mm.
2: The thickness of the back plate is 9 mm, and the quality is much better than that of the 5 mm plate.
3: The top board of the cabinet is the first choice of solid wood board, and the second choice is multi-layer solid wood board.
4: The quality of the hinge must be good. If the economy is rich, you can choose imported brands. If you pursue cost-effectiveness, you can buy domestic products.
5: The quality of the side sealing board basically determines the service life of the cabinet. It is recommended to use two layers of side sealing board.
6: The back panel of the cabinets must be made of double-sided fireproof skin.
7: It is better to use aluminum alloy or stainless steel for the feet of the cabinets.
8: The cabinet pull basket must be paid attention to, whether its design is reasonable, and whether it can hold the tableware at home.
9: It is best to choose a thickness of 15 mm or 20 mm for the countertop.
